From: Jonathan V Hays (jhays@jtan.com)
Date: Sun Jul 20 2003 - 10:07:50 GMT-3
In brief, when EIGRP is configured on the router, "EIGRP split-horizon"
is enabled by default on all router interfaces, including vlan
interfaces. This is *not* the same thing as ip split-horizon.
Whether or not you disable EIGRP split-horizon depends on your scenario
and what you are trying to do.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/
fipr_c/ipcprt2/1cfeigrp.htm#1001215
Additionally, there is a wealth of information on EIGRP split horizon
issue in the groupstudy archives.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Chawalit
Sent: Sunday, July 20, 2003 7:05 AM
To: ccielab@groupstudy.com
Subject: Eigrp on Frame-relay point-to-point
Hi,
When I run EIGRP on Frame-relay point-to-point (physical
interface not sub). Do I need to enable IP Split-horizon?
R1 --------FR---------R2
Thank
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:46 GMT-3