From: Jason Cash (cash2001@swbell.net)
Date: Tue Jul 15 2003 - 10:21:05 GMT-3
A task instructs that "routes adv. by BB1 should have routing code type in
routing table as "i su" on R4. I redistribute RIP into ISIS (on R2 going to
R4) but the routes do not have the 'i su" by them. What is that? I don't
even see that as an option on the table:
r4#si isis
136.10.0.0/16 is variably subnetted, 8 subnets, 4 masks
i L2 136.10.2.0/24 [115/10] via 136.10.24.2, Serial0/0
i L2 136.10.1.0/24 [115/10] via 136.10.24.2, Serial0/0
i L2 136.10.12.0/24 [115/10] via 136.10.24.2, Serial0/0
i L2 136.10.25.0/30 [115/10] via 136.10.24.2, Serial0/0
i L2 136.10.100.0/27 [115/10] via 136.10.24.2, Serial0/0
Also, the command 'metric-style wide trans' isn't available to me on me 2500
or 2620 running the latest 12.1(20) code. Is this the cause?
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:39 GMT-3