From: SHARMA,MOHIT (HP-Germany,ex1) (mohit.sharma@hp.com)
Date: Tue Jul 15 2003 - 07:27:13 GMT-3
I guess you need to usee LLQ, with priority 128
and police command in your policy map, limiting the voice traffic to 1mbps,
during non-congestion hours.
Smiles,
Mohit.
-----Original Message-----
From: Shane Marquis [mailto:Shane.Marquis@busint.com.au]
Sent: Tuesday, July 15, 2003 7:42 AM
To: 'ccielab@groupstudy.com'
Subject: Voice QOS question
All,
I hope this is not a stupid question, but as I've always been told - there
are no stupid questions only stupid people so here goes :-)
I have a question on a sample exam that asks me to give a priority queue of
128kb/s to voice but then goes on to ask for me to limit the outgoing
traffic to 1mb/s - the outgoing interface is Ethernet.
I have configured a service policy giving 128kb/s but I am unsure how to
then limit the traffic to 1mb/s I've been unable to find a solution on CCO.
Can anyone offer any ideas?
Shane
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:39 GMT-3