From: Jonathan V Hays (jhays@jtan.com)
Date: Mon Jul 14 2003 - 15:36:30 GMT-3
Not sure if this will help, but try forcing r2 to be the DR:
r1
isis priority 0
r2
isis priority 127
r3
isis priority 0
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of polarccie@yahoo.co.uk
> Sent: Monday, July 14, 2003 1:37 PM
> To: ccielab@groupstudy.com
> Subject: isis default
>
>
> Hi group...
> in a topology like
>
> r2s0
> r1------ -------r3
>
> this is the isis over nbma...
> r123 are in the same isis area.
> r1-r2 has a l1/l2 neighborship and
> r2-r3 has a l1 neighborship...
>
> when i, default-information-originate on r2...
> i can not get r3 receive the default...although r1 receives it.
>
> i checked the archieves
> tried clns routing on neighboring interfaces,
> another isis neighbor for r2 in a different area.still nothing.
>
> thank you.
>
>
> ______________________________________________________________
> _________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:39 GMT-3