From: boby2kusa@hotmail.com
Date: Mon Jul 14 2003 - 14:37:52 GMT-3
what is the best-way of setting Tunnel addresses..?
>>>hmm, not sure what you mena by this but the tunnel address is an ip
address that should be in a different subnet than what you already have
configured in the router with the tunnel interface.
source-destination addresses and the ip address of the interface itself.
>>> The source ip address should be the ip address of the outgoing interface
to the destination. The destination ip address should the ip address of the
destination interface. If not, the tunnel will not work.
----- Original Message -----
From: <polarccie@yahoo.co.uk>
To: <ccielab@groupstudy.com>
Sent: Monday, July 14, 2003 9:59 AM
Subject: Creating Tunnel Interfaces
> Hello Group...
> what is the best-way of setting Tunnel addresses..?
> source-destination addresses and the ip address of the interface itself.
> how to set the tunnel ip address?
> do we need to grab an unused subnet from the allowed range for a Tunnel?
>
> Best Regards..
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:39 GMT-3