From: Ansar Mohideen (ansar@garmco.com)
Date: Mon Jul 14 2003 - 01:24:38 GMT-3
Hi Mohit
Sorry the port should not be there. It is session target command.
Thanks
-----Original Message-----
From: Ansar Mohideen [mailto:ansar@garmco.com]
Sent: Sunday, July 13, 2003 7:48 AM
To: ccielab@groupstudy.com
Subject: VOIP + gives fast busy signal
Hi
I have a problem with my Voice configuration
Configuration for POTS and VOIP peers work just fine.
When I try to use a VOIP peer destination with a leading + sign (to flag
E.164), as soon as I dial anything on either phone, I get a fast busy.
I'm configuring the dial-peer exactly as is exemplified in CCO
documentation:
dial-peer voice 10 voip
destination-pattern +.T
port 0/0/0
When I remove the + everything works fine. Any inputs are welcome
Thanks,
Ansar
-----------------------------------------------------------------------
This e-mail message and any files transmitted with it are confidential
and are intended solely for the use of the individual or entity to whom
they are addressed. If you are not the intended recipient, or the
person responsible for delivering the e-mail to the intended recipient
be advised that you have received this e-mail in error and that any
use, dissemination, forwarding, printing, or copying of this e-mail is
strictly prohibited If you have received an e-mail in error, please
immediately notify your direct supervisor or contact GARMCO IT Helpdesk
on (973)-734664, email IThelp@garmco.com.
Thank you very much for your co-operation.
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:38 GMT-3