From: John Matijevic (matijevi@bellsouth.net)
Date: Sun Jul 13 2003 - 18:22:56 GMT-3
Hello,
Do you have username R5 password command on R2?
Be carefull of the case, R5 vs. r5.
Also, could you post full configs of r2 and r5?
Sincerely,
Matijevic
----- Original Message -----
From: "Dan Lockwood" <dlockwood@coe.shastalink.k12.ca.us>
To: "Jonathan V Hays" <jhays@jtan.com>; <ccielab@groupstudy.com>
Sent: Sunday, July 13, 2003 4:47 PM
Subject: RE: Some help with PPP callback
> Sry for missing that in the Cut/Paste, but it is in there. Thanks for
> the suggestion.
>
> Dan
>
> -----Original Message-----
> From: Jonathan V Hays [mailto:jhays@jtan.com]
> Sent: Sunday, July 13, 2003 13:14
> To: Dan Lockwood; ccielab@groupstudy.com
> Subject: RE: Some help with PPP callback
>
>
> I don't see the following in your config:
>
> map-class dialer CALLBACK
> dialer callback-server username
>
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> > Behalf Of Dan Lockwood
> > Sent: Sunday, July 13, 2003 3:48 PM
> > To: ccielab@groupstudy.com
> > Subject: Some help with PPP callback
> >
> >
> > Everyone,
> >
> > I'm working a lab with PPP callback and am overlooking something
> > fundamental. R5 should request callback from R2. R5 makes the
> > request ok, but R2 logs the following:
> >
> > 2d00h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up Jul 13
> > 08:35:41.130 EDT: BR0:1 PPP: Treating connection as a callin Jul 13
> > 08:35:41.270 EDT: BR0:1 CHAP: O CHALLENGE id 23 len 23 from "R2"
> > Jul 13 08:35:41.294 EDT: BR0:1 CHAP: I RESPONSE id 23 len 23 from "R5"
> > Jul 13 08:35:41.298 EDT: BR0:1 CHAP: O SUCCESS id 23 len 4
> > Jul 13 08:35:41.306 EDT: BR0:1 DDR: No callback configured
> > for user R5.
> > Jul 13 08:35:41.310 EDT: BR0:1 DDR: disconnecting call
> > 2d00h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
> > Jul 13 08:35:41.406 EDT: BR0:1 DDR: disconnecting call
> > 2d00h: %SYS-5-CONFIG_I: Configured from console by console
> >
> > Can someone give me a hint about the "No callback configured for user
> > R5"? Thanks!
> >
> > !R2
> > interface BRI0
> > ip address 110.90.12.2 255.255.255.0
> > encapsulation ppp
> > ip ospf demand-circuit
> > dialer callback-secure
> > dialer idle-timeout 30
> > dialer enable-timeout 3
> > dialer map ip 110.90.12.5 name R5 class CALLBACK broadcast 8358662
> > dialer map ip 110.90.12.5 name R5 class CALLBACK broadcast 8358664
> > dialer-group 1 isdn switch-type basic-net3
> > ppp callback accept
> > ppp authentication chap
> > ppp multilink
> >
> > !R5
> > interface BRI0
> > ip address 110.90.12.5 255.255.255.0
> > encapsulation ppp
> > ip ospf demand-circuit
> > dialer idle-timeout 30
> > dialer map ip 110.90.12.2 name R2 broadcast 8358661
> > dialer map ip 110.90.12.2 name R2 broadcast 8358663 dialer-group 1
> > isdn switch-type basic-net3
> > ppp callback request
> > ppp multilink
> >
> > Dan Lockwood
> > Microsoft Certified Professional
> > CompTIA Network+ Certified
> > Cisco Certified Network Associate
> >
> >
> > ______________________________________________________________
> > _________
> > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:38 GMT-3