FW Blade..

From: Tamer Bayomy (tamer.bayomy@Masreya.com.eg)
Date: Sun Jul 13 2003 - 05:47:43 GMT-3

• Next message: ccie: "RE:"
• Previous message: freewilly free: "Reg. DLSw+ Monitoring using SNA View & Blue Maps"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Dear All,

IC"b,b"m having a problem on 6513 catalyst switch, letC"b,b"s say I have 4 VLANs so I had created the VLANs on the switch and then configured the interfaceVLANs and the IP addresses and the routing is done correctly between VLANs, all PC/Servers in different networks ping each other. I also had DHCP server in my server farm. So IP Helper-address was configured under every interfaceVLANs to point to the DHCP server and all clients in different VLANs got their IPs from the DHCP correctly. I also had a Firewall Blade module installed in the catalyst 6513 core switch.

My question/problem is how to configure this FW Blade module with the equivalent command to the IP helper-Address??

Thanks..

Tamer Bayomy

• Next message: ccie: "RE:"
• Previous message: freewilly free: "Reg. DLSw+ Monitoring using SNA View & Blue Maps"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:38 GMT-3