From: Jan-Willem Bouman (Cisco Systems) (jbouman@cisco.com)
Date: Fri Jul 11 2003 - 07:44:06 GMT-3
The documentation for 12.3 is better:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/iprrp_r/ip2_c1g.htm#1038093
(Mind the wrap)
"To control the candidate default routing information between IGRP or
Enhanced IGRP processes, use the default-information command in router
configuration mode. To suppress IGRP or Enhanced IGRP candidate information
in incoming or outbound updates, use the no default-information in command.
Defaults
Normally, exterior routes are always accepted and default information is
passed between EIGRP processes when redistribution occurs. "
Hope this helps
At 07:29 07/11/2003, polarccie@yahoo.co.uk wrote:
>Hi Group,
>did anybody manage to get this command work in eigrp?
>i played with it but could not get it work.Besides it is poorly documented.
>any experiences with this one?
>
>
>PS:Please dont send command ref, or config guide links.
>
>
>_______________________________________________________________________
>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:35 GMT-3