From: JenBell (Jennifer_bellucci@hotmail.com)
Date: Thu Jul 10 2003 - 22:56:08 GMT-3
Hi People
Got a question...very dumb one at that but with one brain cell you can't blame
for not finding a solution to a minor situation.
R1 has a Fastethernet port which connects to R2 Ethernet which is a 10MB
link.
How can I mimic this setting on serial links? Now, R1's FA 0/0 is running at
10MB obviously but does this effect say the cost of say OSPF and what is that
effect on the cost?
Basically...I am asking that while the protocol might know that 10MB is the
bandwidth does it also know that the interface is capable of 100MB and use
this as a factor when calculating the cost.
Finally....where do protocols that take interface bandwidth into consideration
when calculating metrics actually get the bandwidth from? Inside the router,
would the protocol do a "sh int fa0/0" to get the value or would it simply get
it from running config.
Thanks for your help.
Somebody please help me.....
.
Jennifer Bellucci
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:35 GMT-3