From: Jonathan V Hays (jhays@jtan.com)
Date: Thu Jul 10 2003 - 14:58:35 GMT-3
Did you forget to add "network 189.18.0.0" under "router rip" on R4?
There are some common RIP and RIP redistribution problems, but you still
need to post the configurations for R3 and R4. Otherwise it is hard for
another person to see the whole picture.
Thanks.
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of James R Big
> Sent: Thursday, July 10, 2003 1:48 PM
> To: ccielab@groupstudy.com
> Subject: ospf and rip
>
>
> Hum.. R3 can't see R4's lo 0 why?
>
> R3 has ospf and rip(version1)
>
> ..
>
>
>
>
> s1 s1
> R2-----ospf(area0)------R3-lo 0
> |S0 |s0
> | |
> ospf(area1) rip(version1)
> | |
> |s0 |s0
> R1 R4
>
>
>
>
>
> R1.
> lo 189.18.1.1 255.255.255.0
> s0 152.1.1.1 255.255.255.252
>
> R2
> lo 189.18.2.2 255.255.255.0
> s0 152.1.1.2 255.255.255.252
> s1 152.1.1.5 255.255.255.252
>
> R3
> lo 189.18.3.3 255.255.255.0
> s0 152.1.2.3 255.255.255.0
> s1 152.1.1.6 255.255.255.252
>
> R4
> lo 189.18.4.4 255.255.255.0
> l1 152.1.3.4 255.255.255.0
> s0 152.1.2.4 255.255.255.0
>
>
>
>
>
>
> ---------------------------------
> Do you Yahoo!?
> SBC Yahoo! DSL - Now only $29.95 per month!
>
>
> ______________________________________________________________
> _________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:34 GMT-3