From: Danny.Andaluz@triaton-na.com
Date: Wed Jul 09 2003 - 16:02:15 GMT-3
Hey, Group. I am seeing an issue with ppp callback using pap
authentication. I have looked through the doc CD and what I have found is
that if you don't have a sent-username configured it uses the router host
name. The weird thing is, that without this line the callback would not
work. Without callback running, everything is fine with or without this
sent-username line. CCO says nothing about this line being required. Could
this be a possible bug with 12.2? Here are the links. Maybe I misread. I
have before, but take a look.
For the first link just do a search from the browser on "sent-username" .
<http://cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fdial_r
/drfmupp.htm>
http://cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fdial_r/
drfmupp.htm
<http://cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fdial_c
/fnsprt10/dafcbddr.htm#1000893>
http://cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fdial_c/
fnsprt10/dafcbddr.htm#1000893
Here is the config on the bri0:
interface BRI0
ip address xx.xx.xx.xx xx.xx.xx.xx
encapsulation ppp
dialer map ip xx.xx.xx.xx name r5 broadcast xxxx
dialer-group 1
isdn switch-type basic-ni
isdn spid1 xxxxxxxxxx
cdapi buffers regular 0
cdapi buffers raw 0
cdapi buffers large 0
ppp callback request
ppp authentication pap
ppp pap sent-username r2 password 7 xxxxx
!
dialer-list 1 protocol ip permit
Thanks,
Danny
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:31 GMT-3