From: ccie2be4 (ccie2be4@myrealbox.com)
Date: Wed Jul 09 2003 - 08:45:06 GMT-3
I think that there are 2 method by which u can solve
a) maximum reserver 90.. then also the rest of the traffic will go through
the left 10%
Or
b) you can resever 100% and in class-default assing 10% bandwidht to it,
Now i am not clear which is better answer
param
----- Original Message -----
From: "love cisco" <love_cisco@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, July 09, 2003 3:26 PM
Subject: need Qos Guru help
> I have a CBWFQ question here. I searched CCO. But could not find any
useful
> information.
>
> For a link, www need 35% bandwidth, ftp need 40% bandwidth, telnet need
15%
> bandwidth. Other traffic use rest of the bandwidth.
>
> By default, the max-reserved bandwidth is 75%. If I change the
max-reserved
> bandwidth to 100%, Is that means no bandwidth available for routing
> protocol or the routing protocol will be treated as !0other traffic!1 and
> use rest of the 10% bandwidth?
>
> Any idea?
>
> _________________________________________________________________
> OmSCJ@=gIOWn4s5D5gWSSJ<~O5M3!* MSN Hotmail!# http://www.hotmail.com
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:30 GMT-3