From: John Matijevic (matijevi@bellsouth.net)
Date: Wed Jul 09 2003 - 00:30:17 GMT-3
Hello Tim,
Thanks again,
Frame mappings look ok:
frs#sh frame route
Input Intf Input Dlci Output Intf Output Dlci Status
Serial0 102 Serial1 201 active
Serial0 103 Serial2 301 active
Serial0 104 Serial3 401 active
Serial1 201 Serial0 102 active
Serial1 203 Serial2 302 active
Serial1 204 Serial3 402 active
Serial2 301 Serial0 103 active
Serial2 302 Serial1 203 active
Serial2 304 Serial3 403 active
Serial3 401 Serial0 104 active
Serial3 402 Serial1 204 active
Serial3 403 Serial2 304 active
frs#
Sincerley,
Matijevic
----- Original Message -----
From: "Snow, Tim" <timothy.snow@eds.com>
To: "'John Matijevic'" <matijevi@bellsouth.net>
Cc: <ccielab@groupstudy.com>
Sent: Tuesday, July 08, 2003 11:16 PM
Subject: RE: mismatch area in header
> Looks like r2 is receiving a message from r4 (DLCI 401). Isn't DLCI 401
> supposed to goto r1 and not r2? I think that's the problem. Can you post
> your frame-relay "sh frame route" config?
>
> 01:25:59: OSPF: Rcv pkt from 172.16.14.4, Serial0, area 0.0.0.0
> mismatch area 0.0.0.14 in the header
>
> -----Original Message-----
> From: John Matijevic [mailto:matijevi@bellsouth.net]
> Sent: Tuesday, July 08, 2003 11:08 PM
> To: Snow, Tim
> Subject: Re: mismatch area in header
>
>
> Hi Tim,
> I ran the frame map, everything looks fine, no 0.0.0.0. Pvc are
established
> and active. Thanks again for help.
> sincerely,
> John
> ----- Original Message -----
> From: "Snow, Tim" <timothy.snow@eds.com>
> To: "'John Matijevic'" <matijevi@bellsouth.net>
> Sent: Tuesday, July 08, 2003 10:59 PM
> Subject: RE: mismatch area in header
>
>
> > What does your "sh frame map" on all 3 routers look like? If you see
the
> > 0.0.0.0 that might be indicative of the frame issue.
> >
> >
> >
> > -----Original Message-----
> > From: John Matijevic [mailto:matijevi@bellsouth.net]
> > Sent: Tuesday, July 08, 2003 10:44 PM
> > To: Snow, Tim; ccielab@groupstudy.com
> > Subject: Re: mismatch area in header
> >
> >
> > Thanks Tim,
> > I tried both commands but I am still getting the message.
> > Sincerely,
> > Matijevic
> > ----- Original Message -----
> > From: "Snow, Tim" <timothy.snow@eds.com>
> > To: "'John Matijevic'" <matijevi@bellsouth.net>;
<ccielab@groupstudy.com>
> > Sent: Tuesday, July 08, 2003 10:26 PM
> > Subject: RE: mismatch area in header
> >
> >
> > > I seem to have a faint memory of this type of issue happening with
Frame
> > > Relay Inverse arp automagically mapping addresses that I didn't want
> > mapped.
> > >
> > >
> > > Which is why I usually turn on "no arp frame", "no frame inverse-arp"
> > always
> > > now. Take a look at that and see if that could be causing any issues.
> > >
> > > Tim
> > >
> > >
> > > -----Original Message-----
> > > From: John Matijevic [mailto:matijevi@bellsouth.net]
> > > Sent: Tuesday, July 08, 2003 10:12 PM
> > > To: John Matijevic; ccielab@groupstudy.com
> > > Subject: Re: mismatch area in header
> > >
> > >
> > > Hello Team,
> > > Still working on this....
> > > Here are configs so you can have a better idea of whats going on,
again
> > > adjacencies are established, and i can ping across network.
> > > Sincerely,
> > > Matijevic
> > > r2#wr t
> > > Building configuration...
> > >
> > > Current configuration : 1415 bytes
> > > !
> > > version 12.1
> > > no service single-slot-reload-enable
> > > service timestamps debug uptime
> > > service timestamps log uptime
> > > no service password-encryption
> > > !
> > > hostname r2
> > > !
> > > logging rate-limit console 10 except errors
> > > !
> > > ip subnet-zero
> > > no ip finger
> > > !
> > > cns event-service server
> > > !
> > > !
> > > !
> > > !
> > > !
> > > interface Loopback0
> > > description management-loopback-interface
> > > ip address 172.16.102.1 255.255.255.255
> > > !
> > > interface Ethernet0
> > > ip address 172.16.20.2 255.255.255.0
> > > !
> > > interface Serial0
> > > ip address 172.16.123.2 255.255.255.0
> > > encapsulation frame-relay
> > > ip ospf network non-broadcast
> > > ip ospf priority 0
> > > frame-relay map ip 172.16.123.1 201 broadcast
> > > frame-relay map ip 172.16.123.2 201 broadcast
> > > frame-relay map ip 172.16.123.3 201 broadcast
> > > frame-relay lmi-type ansi
> > > !
> > > interface Serial1
> > > no ip address
> > > shutdown
> > > !
> > > interface BRI0
> > > no ip address
> > > shutdown
> > > !
> > > router ospf 1
> > > router-id 172.16.102.1
> > > log-adjacency-changes
> > > summary-address 172.16.50.0 255.255.255.0
> > > redistribute rip subnets route-map rip2ospf
> > > network 172.16.102.1 0.0.0.0 area 20
> > > network 172.16.123.0 0.0.0.255 area 0
> > > !
> > > router rip
> > > redistribute ospf 1 metric 2
> > > passive-interface default
> > > no passive-interface Ethernet0
> > > network 172.16.0.0
> > > !
> > > ip kerberos source-interface any
> > > ip classless
> > > no ip http server
> > > !
> > > access-list 1 permit 172.16.20.0 0.0.0.255
> > > route-map rip2ospf permit 10
> > > match ip address 1
> > > !
> > > !
> > > !
> > > line con 0
> > > transport input none
> > > line aux 0
> > > line vty 0 4
> > > login
> > > !
> > > end
> > >
> > > r2#
> > > comm-server#1
> > > [Resuming connection 1 to r1 ... ]
> > >
> > >
> > >
> > >
> > > r1>en
> > > r1#wr t
> > > Building configuration...
> > >
> > > Current configuration : 1396 bytes
> > > !
> > > version 12.1
> > > no service single-slot-reload-enable
> > > service timestamps debug uptime
> > > service timestamps log uptime
> > > no service password-encryption
> > > !
> > > hostname r1
> > > !
> > > logging rate-limit console 10 except errors
> > > !
> > > ip subnet-zero
> > > no ip finger
> > > !
> > > cns event-service server
> > > !
> > > !
> > > !
> > > !
> > > !
> > > interface Loopback0
> > > description loopback-management-interface
> > > ip address 172.16.101.1 255.255.255.255
> > > !
> > > interface Ethernet0
> > > no ip address
> > > shutdown
> > > !
> > > interface Serial0
> > > no ip address
> > > encapsulation frame-relay
> > > no fair-queue
> > > frame-relay lmi-type ansi
> > > !
> > > interface Serial0.1 multipoint
> > > ip address 172.16.123.1 255.255.255.0
> > > ip ospf network non-broadcast
> > > frame-relay map ip 172.16.123.1 102 broadcast
> > > frame-relay map ip 172.16.123.2 102 broadcast
> > > frame-relay map ip 172.16.123.3 103 broadcast
> > > no frame-relay inverse-arp
> > > !
> > > interface Serial0.2 point-to-point
> > > ip address 172.16.14.1 255.255.255.0
> > > ip ospf network point-to-point
> > > frame-relay interface-dlci 104
> > > !
> > > interface Serial1
> > > no ip address
> > > shutdown
> > > !
> > > interface BRI0
> > > no ip address
> > > shutdown
> > > !
> > > router ospf 1
> > > router-id 172.16.101.1
> > > log-adjacency-changes
> > > network 172.16.14.0 0.0.0.255 area 14
> > > network 172.16.101.1 0.0.0.0 area 10
> > > network 172.16.123.0 0.0.0.255 area 0
> > > neighbor 172.16.123.3
> > > neighbor 172.16.123.2
> > > !
> > > ip kerberos source-interface any
> > > ip classless
> > > no ip http server
> > > !
> > > !
> > > !
> > > line con 0
> > > transport input none
> > > line aux 0
> > > line vty 0 4
> > > login
> > > !
> > > end
> > >
> > > r1#
> > > comm-server#4
> > > [Resuming connection 4 to r4 ... ]
> > >
> > >
> > >
> > > r4>en
> > > r4#wr t
> > > Building configuration...
> > >
> > > Current configuration : 1211 bytes
> > > !
> > > version 12.1
> > > no service single-slot-reload-enable
> > > service timestamps debug uptime
> > > service timestamps log uptime
> > > no service password-encryption
> > > !
> > > hostname r4
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > ip subnet-zero
> > > !
> > > ip audit notify log
> > > ip audit po max-events 100
> > > !
> > > !
> > > !
> > > !
> > > voice-port 1/0/0
> > > !
> > > voice-port 1/0/1
> > > !
> > > !
> > > !
> > > !
> > > interface Loopback0
> > > description management-loopback-interface
> > > ip address 172.16.104.1 255.255.255.255
> > > !
> > > interface Loopback1
> > > ip address 4.4.4.4 255.255.255.0
> > > !
> > > interface FastEthernet0/0
> > > ip address 172.16.34.4 255.255.255.0
> > > duplex auto
> > > speed auto
> > > !
> > > interface Serial0/0
> > > ip address 172.16.14.4 255.255.255.0
> > > encapsulation frame-relay
> > > ip ospf network point-to-point
> > > frame-relay map ip 172.16.14.1 401 broadcast
> > > frame-relay map ip 172.16.14.4 401 broadcast
> > > frame-relay lmi-type ansi
> > > !
> > > interface Serial0/1
> > > no ip address
> > > shutdown
> > > !
> > > router ospf 1
> > > router-id 172.16.104.1
> > > log-adjacency-changes
> > > redistribute rip subnets
> > > network 172.16.14.0 0.0.0.255 area 14
> > > !
> > > router rip
> > > version 2
> > > redistribute ospf 1 metric 2
> > > passive-interface default
> > > no passive-interface FastEthernet0/0
> > > network 4.0.0.0
> > > network 172.16.0.0
> > > no auto-summary
> > > !
> > > ip classless
> > > ip http server
> > > !
> > > !
> > > !
> > > !
> > > line con 0
> > > line aux 0
> > > line vty 0 4
> > > login
> > > !
> > > end
> > >
> > > r4#
> > > ----- Original Message -----
> > > From: "John Matijevic" <matijevi@bellsouth.net>
> > > To: <ccielab@groupstudy.com>
> > > Sent: Tuesday, July 08, 2003 9:42 PM
> > > Subject: mismatch area in header
> > >
> > >
> > > > Hello Team,
> > > > I have the following scenerio:
> > > > I have area 0 and area 14,
> > > > R1, R2 and R3 is in Area 0
> > > > R1 and R4 area in area 14
> > > > I can establish adjacencies fine.
> > > > But for some reason when I turn on deb ip ospf adj,
> > > > I get the following:
> > > > mismatch area 0.0.0.14 in the header,
> > > > Again, I can ping and form adjacencys, everything looks ok, but I
want
> > to
> > > > resove this mismatch message I keep getting on R2, and R3,
> > > > Any assistance would be greatly appreciated!
> > > > Sincerely,
> > > > Matijevic
> > > >
> > > >
> > > >
> _______________________________________________________________________
> > > > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> > > >
> > > > Subscription information may be found at:
> > > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > >
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:29 GMT-3