From: Jim Phillipo (jim.phillipo@guardent.com)
Date: Tue Jul 08 2003 - 16:55:50 GMT-3
We had problems with our Concentrators and OSPF.
Ended up putting the routes on the core routers then redistributing them
into OSPF as E1.
The routers provide a lot more control over the routing than the
Concentrators.
Just my 2 cents.
-----Original Message-----
From: sladjan stefanovic [mailto:sslad@hotmail.com]
Sent: Tuesday, July 08, 2003 3:41 PM
To: ccielab@groupstudy.com
Subject: vpn 3000 concentrator and redistributing static routes in to
OSPF
Have a problem with redistribution . We have 2 data centers with VPN
3000-s.
OSPF routing in our core. VPN concentrator #1 has static route pointing
to remote site with metric 1. VPN concentrator #2 has static to same
remote site with metric 10. Both redistributing static in to OSPF core.
Problem:
Routers in the core see remote site network with ospf e2 (110/20) for
both.
Question:
How can I change config on VPN 3000 concentrator to enable redistribution
so routers in the core can see: ospf e1 (110 /1) and ospf e1 (110/10) .
So I can force trffic trough VPN 3000 concentrator #1 for some remote
networks. Some remote networks should go trough concentrator #2
Anyway,
My goal is to have different metric in te core ...Any suggestions?
Thanks! Sladjan StefanovicCCIE #9605
------------------------------------------------------------------------
The new MSN 8: smart spam protection and 2 months FREE*
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:28 GMT-3