From: Biondino, Joseph (joseph.biondino@au.unisys.com)
Date: Mon Jul 07 2003 - 07:29:28 GMT-3
How do you match even subnets only??
-----Original Message-----
From: Chen Kwong Wai William [mailto:kwchen@netvigator.com]
Sent: Monday, 7 July 2003 8:21 PM
To: Jim Phillipo; ccielab@groupstudy.com
Subject: ??: Filtering on even or odd subnets
Dear Jim,
I think the correct access-list should be:
192.168.0.0 0.0.254.0
Best Regards,
William Chen
>
> 1H%s*L: Jim Phillipo <jim.phillipo@guardent.com>
> $i4A: 2003/07/07 ,P4A$@ $U$H 06:04:28 GMT+08:00
> &,%s*L: "'ccielab@groupstudy.com'" <ccielab@groupstudy.com>
> %D&.: Filtering on even or odd subnets
>
> Not sure why this is not working. I am trying to filter out the even third
> octets with 0.0.0.0 0.0.254.0.
>
> The BGP neighbor is still receiving them ?
>
> Any thoughts?
>
> My config looks like this:
>
> router bgp 300
> no synchronization
> bgp log-neighbor-changes
> network 9.0.0.0
> network 192.168.1.0
> network 192.168.4.0
> network 192.168.7.0
> network 192.168.24.0
> network 192.168.34.0
> neighbor 172.31.90.9 remote-as 96
> neighbor 172.31.90.9 route-map FILTER out
> no auto-summary
>
> access-list 199 permit ip 0.0.0.0 0.0.254.255 any
> route-map FILTER deny 5
> match ip address 199
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
Best Regards,
William Chen
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:26 GMT-3