From: P729 (p729@cox.net)
Date: Sun Jul 06 2003 - 18:39:34 GMT-3
There needs to be at least one other router in the standby group that _is_
configured with the standby IP address...
Regards,
Mas Kato
https://ecardfile.com/id/mkato
----- Original Message -----
From: "Brit Walker (brwalker)" <brwalker@cisco.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, July 06, 2003 5:58 AM
Subject: HSRP - No Standby IP?
Here is the task.
"Do not configure a specific standby IP on the router acting as the
standby for
a group."
I guess you would just put some commands on the standby router that
identifies
it with the standby group, but do not include the standby IP address. I
did not
realize you could do this.
I was not able to get this working the way I think it should. I also
tried the
standby mac-address command just in case, but it did not help.
Suggestions?
Brit
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:26 GMT-3