multicast: PIM RP filtering

From: Emad (emad@zakq8.com)
Date: Sun Jul 06 2003 - 13:33:05 GMT-3

• Next message: Howard C. Berkowitz: "RE: Big picture of mobility (was RE: ip mobile question"
• Previous message: mike mike: "Question on Queueing"
• Next in thread: James.Jackson@broadwing.com: "RE: multicast: PIM RP filtering"
• Maybe reply: James.Jackson@broadwing.com: "RE: multicast: PIM RP filtering"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Folks,
Do you the difference between "ip pim accept-rp ...." command and
"ip pim rp-announce-filter rp-list ....."

Podres(config)#ip pim ?
  accept-register Registers accept filter
  accept-rp RP accept filter
  bsr-candidate Candidate bootstrap router (candidate BSR)
  register-rate-limit Rate limit for PIM data registers
  register-source Source address for PIM Register
  rp-address PIM RP-address (Rendezvous Point)
  rp-announce-filter Auto-RP announce message filter
  rp-candidate To be a PIMv2 RP candidate
  send-rp-announce Auto-RP send RP announcement
  send-rp-discovery Auto-RP send RP discovery message (as RP-mapping
agent)
  spt-threshold Source-tree switching threshold

Podres(config)#ip pim rp
Podres(config)#ip pim rp-announe
Podres(config)#ip pim rp-announc
Podres(config)#ip pim rp-announce-filter 1 ?

Thanx

• Next message: Howard C. Berkowitz: "RE: Big picture of mobility (was RE: ip mobile question"
• Previous message: mike mike: "Question on Queueing"
• Next in thread: James.Jackson@broadwing.com: "RE: multicast: PIM RP filtering"
• Maybe reply: James.Jackson@broadwing.com: "RE: multicast: PIM RP filtering"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:26 GMT-3