From: John Matijevic (matijevi@bellsouth.net)
Date: Fri Jul 04 2003 - 10:25:07 GMT-3
Hello BG,
Search the archives, there is a long thread on this that I started. In a
nutshell, the k1- k5, values represent bandwidth, reliability, dely, load
and mtu, the values are composed of ones and zeros, the default is 1 0 1 0
0, which means that it will use bandwidth and delay. If you change the zero
to one than it will use that value, if you change the value higher than one,
than it will mulitply by the value you specify.
Sincerley,
Matijevic
----- Original Message -----
From: "Budi Gunawan" <bgunawan@hotpop.com>
To: "CCIE Lab GroupStudy" <ccielab@groupstudy.com>
Sent: Friday, July 04, 2003 8:41 AM
Subject: EIGRP Metric Weight
> Hi All,
>
> How to know the value of Metric Weight in EIGRP? (K1, K2, K3, K4, K5)
> Assume this values are configured in Backbone router.
>
>
> Thanks,
> BG.
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:23 GMT-3