From: Emad (emad@zakq8.com)
Date: Thu Jul 03 2003 - 16:01:19 GMT-3
Nawaz,
It is a very useful command but I don't see in the output something that
may solve the problem , I don't see anything about routes in the routing
table as I'm running Eigrp with some static routes!!
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Nawaz, Ajaz
Sent: Thursday, July 03, 2003 8:47 PM
To: 'John Humphrey'; ccielab@groupstudy.com
Subject: RE: Number of hits on a specific route entry
show int switching - a hidden command that 'Might' go some way to
answering
your question.
ajaz
-----Original Message-----
From: John Humphrey [mailto:john.humphrey@txkisd.net]
Sent: 03 July 2003 17:15
To: ccielab@groupstudy.com
Subject: Number of hits on a specific route entry
this may seem like a dumb question but ....
my routing table has approx 30 routes. I would like to find out how many
times each route has been used to pass traffic. I'm not necessarily
looking for the number of packets that have been passed (i know the
router's switching type effect that). I just want to know how many times
the route referenced and used. I've tried "sh ip route 10.1.1.0" but
can't find this information anywhere.
jh
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:22 GMT-3