From: wing_lam@jossynergy.com
Date: Wed Jul 02 2003 - 03:36:32 GMT-3
Hi, Brian, Johnson;
Got it with thanks; after study the link provided by Johnson, I still have
the following question:
1) If I am watching several routes, am I need to add dialer map for each
watched routes?
2) If I am watching 192.168.10.64/29, am I add the dialer map by "dialer
map ip 192.168.10.64 name r2 broadcast 222222" statement? How did the
router knows the subnet mask of the watched route if I have a shorter
prefix but not watching? (say I have a route 192.168.10.64/26 but not want
to be watched, while I want to watch 192.168.10.64/29)?
Thx,
BBD (Big Black Dog)
"Brian Dennis"
<brian@labforge.c To: <wing_lam@jossynergy.com>
om> cc: <ccielab@groupstudy.com>
Subject: RE: ISDN PPP Callback with Dialer Watch
07/02/2003 02:18
PM
You need the dialer map to the watched route because a physical BRI
using dialer maps is a multipoint interface. If you used dialer strings
as opposed to dialer maps then you obviously don't need a dialer map to
the watched route.
What if your interface looked like this?
int bri0/0
ip address 10.10.12.1 255.255.255.0
encapsulation ppp
dialer-group 1
dialer watch-group 1
dialer map ip 10.10.12.2 broadcast 222222
dialer map ip 10.10.12.3 broadcast 333333
dialer map ip 10.10.12.4 broadcast 444444
How does the dialer watch feature know which remote router to call?
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
wing_lam@jossynergy.com
Sent: Tuesday, July 01, 2003 9:45 PM
To: Cristian Henry H
Cc: ccielab@groupstudy.com; nobody@groupstudy.com; Ram Shummoogum
Subject: Re: ISDN PPP Callback with Dialer Watch
Dear Herny,
Just curios why in this case we need to add dialer map statement which
is
the network (10.10.10.0/24) other than the BRI interface
(10.10.12.0/24)?
Shouldn't routing will cater the reachability to 10.10.10.0?
Thx a lot,
BBD (Big Black Dog)
Cristian Henry H
<chenry@reuna.cl> To: Ram Shummoogum
<rshummoo@ca.ibm.com>
Sent by: cc:
ccielab@groupstudy.com
nobody@groupstudy Subject: Re: ISDN PPP
Callback with Dialer Watch
.com
07/02/2003 04:12
AM
Please respond to
Cristian Henry H
Yes, you are right!, please add on r1 the following command
!
dialer map ip 10.10.10.0 name r2 broadcast 222222
!
and add also on r2 the following one:
!
dialer-list 1 protocol permit list 100
!
access-list 100 deny ospf any any
access-list 100 permit ip any any
!
Thanks
Ram Shummoogum ha escrito:
>
> I think you are missing a dialer map ip statement for the route you
are
> watching.
>
> Cristian Henry H <chenry@reuna.cl>@groupstudy.com on 07/01/2003
10:16:49
AM
>
> Please respond to Cristian Henry H <chenry@reuna.cl>
>
> Sent by: nobody@groupstudy.com
>
> To: Budi Gunawan <bgunawan@hotpop.com>
> cc: CCIE Lab GroupStudy <ccielab@groupstudy.com>
> Subject: Re: ISDN PPP Callback with Dialer Watch
>
> Try with this, could works, let me know the results :
>
> Router client
> ----------------
>
> hostname r1
> !
> enable secret cisco
> !
> username r2 password cisco
> !
> int bri0/0
> ip address 10.10.12.1 255.255.255.0
> encapsulation ppp
> ip ospf cost 9000
> isdn switch-type xxxx
> dialer idle-timout 20
> dialer-group 1
> dialer wait-for-carrier 4
> dialer watch-group 1
> ppp callback request
> dialer map ip 10.10.12.2 name r2 broadcast 222222
> ppp authentication chap
> !
> dialer-list 1 protocol ip permit list 100
> !
> dialer watch-list 1 permit 10.10.10.0 255.255.255.0
> !
> access-list 100 deny ospf any any
> access-list 100 permit ip any any
> !
>
> Router server
> -------------
>
> hostname r2
> !
> enable secret cisco
> !
> username r1 password cisco
> !
> int bri0/0
> ip address 10.10.12.2 255.255.255.0
> encapsulation ppp
> ip ospf cost 9000
> isdn switch-type xxxx
> dialer-group 1
> dialer callback-secure
> dialer enable-timeout 2
> dialer idle timeout 0
> dialer map ip 10.10.12.1 name r1 class callback broadcast 111111
> ppp authentication chap
> ppp callback accept
> !
> dialer-list 1 protocol ip permit
> !
> map-class dialer callback
> dialer callback-server username
> !
>
> Budi Gunawan ha escrito:
> >
> > Hi All,
> >
> > Could we make ISDN callback with Dialer watch?
> > If we could, how to configure it?
> >
> > Thanks and regards,
> > BG.
> >
> >
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:18 GMT-3