From: Mr. Richard L. Pickard (nettable_walker@attbi.com)
Date: Tue Jul 01 2003 - 00:22:54 GMT-3
Is there a .PDF on Cisco's site that shows you how to configure NTP ?
everything I see is for the Cat 5000
There has to be something for NTP on routers
Please help
Richard
//
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
wing_lam@jossynergy.com
Sent: Sunday, June 29, 2003 5:19 AM
To: ccielab@groupstudy.com
Subject: NTP problem
Dear Group,
I have a ntp problem, that even the router claims itself as master, it
still fail.
R8#sh run int loo 0
Building configuration...
interface Loopback0
ip address 172.16.1.8 255.255.255.255
end
ntp authentication-key 1 md5 104D000A061843 7
ntp authentication-key 2 md5 13061E01080356 7
ntp authentication-key 3 md5 03075218050072 7
ntp authentication-key 4 md5 14141B180F0B7E 7
ntp authenticate
ntp clock-period 17179484
ntp source Loopback0
ntp access-group peer 12
ntp master 7
end
R8#sh ntp st
Clock is unsynchronized, stratum 16, no reference clock
nominal freq is 250.0000 Hz, actual freq is 250.0056 Hz, precision is 2**18
reference time is C2A93D72.52850DCA (10:26:58.322 UTC Sun Jun 29 2003)
clock offset is 0.0000 msec, root delay is 0.00 msec
root dispersion is 0.02 msec, peer dispersion is 0.02 msec
The following is my debugging.
R8#
2w6d: NTP: nlist 0, allow 0, found 0, low 0.000000, high 0.000000
2w6d: NTP: no select intersection
2w6d: NTP: no select intersection
What is the problem?
Thx,
BBD (Big Black Dog)
DISCLAIMER:- This email is confidential and intended only for the use of
the individual or entity named above and may contain information that is
privileged. If you are not the intended recipient, you are notified that
any dissemination, distribution or copying of this email is strictly
prohibited. If you have received this email in error, please notify us
immediately by return email or telephone and destroy the original message.
Thank you.
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:15 GMT-3