From: John Matijevic (matijevi@bellsouth.net)
Date: Sat Jun 28 2003 - 15:17:37 GMT-3
Picard,
i miss those old star trek series especially with comander data, the movies
made him funny with the personality chip.
great, glad to help. thanks for the feedback.
Sincerley,
John
----- Original Message -----
From: "Mr. Richard L. Pickard" <nettable_walker@attbi.com>
To: "John Matijevic" <matijevi@bellsouth.net>; <ccielab@groupstudy.com>
Sent: Saturday, June 28, 2003 2:23 PM
Subject: RE: cannot get PAP authentication to work --- please help
> Thanks John, I already had username richard password cisco in global
> but on the interface I had ppp pap sent-username R_1 password 0 ISDN
> so I changed the interface to say ppp pap sent-username richard password
> cisco
>
> R_1#ping 165.4.113.3
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 165.4.113.3, timeout is 2 seconds:
> .!!!!
> .!!!!
> R_1#
> 00:19:13: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up
> 00:19:13: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up
> R_1#ping 165.4.113.3
> 00:19:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0:1,
changed
> stat
> e to up
> 00:19:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1,
> chang
> ed state to up
> R_1#ping 165.4.113.3
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 165.4.113.3, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 36/37/41 ms
> R_1#ping 165.4.113.3
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 165.4.113.3, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 36/36/40 ms
> R_1#
> 00:19:19: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to
2127444444
> ric
> hard
> R_1#
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> John Matijevic
> Sent: Friday, June 27, 2003 6:05 PM
> To: Mr. Richard L. Pickard; ccielab@groupstudy.com
> Subject: Re: cannot get PAP authentication to work --- please help
>
>
> Hello Pickard,
> On R3,
> have you tried entering the following:
> ppp pap sent-username R_3 password 0 ISDN
> I think you need to set this up on both sides of the link in order for it
to
> work. That is how I have got it to work pap. Also do you have your
> access-list that specifies the interesting traffic? And the username's on
> each router?
> Sincerely,
> Matijevic
> ----- Original Message -----
> From: "Mr. Richard L. Pickard" <nettable_walker@attbi.com>
> To: <ccielab@groupstudy.com>
> Sent: Friday, June 27, 2003 7:04 PM
> Subject: cannot get PAP authentication to work --- please help
>
>
> > Fiesta
> >
> > I am trying to get R_1 to dial R_3
> > The authentication is failing but I do not understand why !
> >
> > R_1#sh run int bri 0/0
> > Building configuration...
> >
> > Current configuration : 449 bytes
> > !
> > interface BRI0/0
> > ip address 165.4.113.1 255.255.255.0
> > encapsulation ppp
> > dialer map ip 165.4.113.3 name R_3 broadcast 2127444444
> > dialer map ip 165.4.113.3 name R_3 broadcast 2127444445
> > dialer-group 1
> > isdn switch-type basic-5ess
> > isdn spid1 3128675309
> > isdn spid2 3128675310
> > isdn fast-rollover-delay 5
> > snapshot client 5 20 dialer
> > no peer neighbor-route
> > ppp authentication pap
> > ppp pap sent-username R_1 password 0 ISDN
> > ppp multilink
> > end
> >
> > R_3#sh run int brI 0/0
> > Building configuration...
> >
> > Current configuration : 396 bytes
> > !
> > interface BRI0/0
> > ip address 165.4.113.3 255.255.255.0
> > encapsulation ppp
> > dialer map ip 165.4.113.1 name R_1 broadcast 3128675309
> > dialer map ip 165.4.113.1 name R_1 broadcast 3128675310
> > dialer-group 1
> > isdn switch-type basic-5ess
> > isdn spid1 2127444444
> > isdn spid2 2127444445
> > isdn fast-rollover-delay 5
> > no peer neighbor-route
> > snapshot server 5
> > ppp authentication pap
> > ppp multilink
> > end
> >
> > Here is what happens when R_1 pings the ISDN on R_3
> >
> > R_1#sh debugging
> > Dial on demand:
> > Dial on demand events debugging is on
> > PPP:
> > PPP authentication debugging is on
> > R_1#ping 165.4.113.3
> >
> > Type escape sequence to abort.
> > Sending 5, 100-byte ICMP Echos to 165.4.113.3, timeout is 2 seconds:
> >
> > 00:48:42: BR0/0 DDR: Dialing cause ip (s=165.4.113.1, d=165.4.113.3)
> > 00:48:42: BR0/0 DDR: Attempting to dial 2127444444
> > 00:48:43: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up
> > 00:48:43: BR0/0:1 PPP: Using dialer call direction
> > 00:48:43: BR0/0:1 PPP: Treating connection as a callout
> > 00:48:43: BR0/0:1 DDR: disconnecting call
> > 00:48:188978561023: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected
> to
> > 2127
> > 444444 R_3
> > 00:48:43: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to down.
> > 00:48:43: BR0/0:1 DDR: disconnecting call
> > 00:48:44: BR0/0 DDR: Dialing cause ip (s=165.4.113.1, d=165.4.113.3)
> > 00:48:44: BR0/0 DDR: Attempting to dial 2127444444
> > 00:48:45: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up
> > 00:48:45: BR0/0:1 PPP: Using dialer call direction
> > 00:48:45: BR0/0:1 PPP: Treating connection as a callout
> > 00:48:45: BR0/0:1 DDR: disconnecting call
> > 00:48:197568495615: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected
> to
> > 2127
> > 444444 R_3
> > 00:48:45: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to down.
> > 00:48:45: BR0/0:1 DDR: disconnecting call
> > 00:48:46: BR0/0 DDR: Dialing cause ip (s=165.4.113.1, d=165.4.113.3)
> > 00:48:46: BR0/0 DDR: Attempting to dial 2127444444
> > 00:48:47: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up
> > 00:48:47: BR0/0:1 PPP: Using dialer call direction
> > 00:48:47: BR0/0:1 PPP: Treating connection as a callout
> > 00:48:47: BR0/0:1 DDR: disconnecting call
> > 00:48:206158430207: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected
> to
> > 2127
> > 444444 R_3
> > 00:48:47: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to down.
> > 00:48:47: BR0/0:1 DDR: disconnecting call
> > 00:48:48: BR0/0 DDR: Dialing cause ip (s=165.4.113.1, d=165.4.113.3)
> > 00:48:48: BR0/0 DDR: Attempting to dial 2127444444
> > 00:48:49: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up
> > 00:48:49: BR0/0:1 PPP: Using dialer call direction
> > 00:48:49: BR0/0:1 PPP: Treating connection as a callout
> > 00:48:49: BR0/0:1 DDR: disconnecting call
> > 00:48:214748364799: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected
> to
> > 2127
> > 444444 R_3
> > 00:48:49: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to down.
> > 00:48:49: BR0/0:1 DDR: disconnecting call
> > 00:48:50: BR0/0 DDR: Dialing cause ip (s=165.4.113.1, d=165.4.113.3)
> > 00:48:50: BR0/0 DDR: Attempting to dial 2127444444
> > 00:48:51: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up
> > 00:48:51: BR0/0:1 PPP: Using dialer call direction
> > 00:48:51: BR0/0:1 PPP: Treating connection as a callout
> > 00:48:51: BR0/0:1 DDR: disconnecting call
> > 00:48:223338299391: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected
> to
> > 2127
> > 444444 R_3
> > 00:48:51: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to down.
> > Success rate is 0 percent (0/5)
> > R_1#
> > 00:48:51: BR0/0:1 DDR: disconnecting call
> > R_1#ping 165.4.113.3
> >
> > Type escape sequence to abort.
> > Sending 5, 100-byte ICMP Echos to 165.4.113.3, timeout is 2 seconds:
> >
> > 00:48:55: BR0/0 DDR: Dialing cause ip (s=165.4.113.1, d=165.4.113.3)
> > 00:48:55: BR0/0 DDR: Attempting to dial 2127444444
> > 00:48:56: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up
> > 00:48:56: BR0/0:1 PPP: Using dialer call direction
> > 00:48:56: BR0/0:1 PPP: Treating connection as a callout
> > 00:48:56: BR0/0:1 DDR: disconnecting call
> > 00:48:244813135871: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected
> to
> > 2127
> > 444444 R_3
> > 00:48:56: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to down.
> > 00:48:56: BR0/0:1 DDR: disconnecting call
> > 00:48:57: BR0/0 DDR: Dialing cause ip (s=165.4.113.1, d=165.4.113.3)
> > 00:48:57: BR0/0 DDR: Attempting to dial 2127444444
> > 00:48:58: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up
> > 00:48:58: BR0/0:1 PPP: Using dialer call direction
> > 00:48:58: BR0/0:1 PPP: Treating connection as a callout
> > 00:48:58: BR0/0:1 DDR: disconnecting call
> > 00:48:253403070463: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected
> to
> > 2127
> > 444444 R_3
> > 00:48:58: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to down.
> > 00:48:58: BR0/0:1 DDR: disconnecting call
> > 00:48:59: BR0/0 DDR: Dialing cause ip (s=165.4.113.1, d=165.4.113.3)
> > 00:48:59: BR0/0 DDR: Attempting to dial 2127444444
> > 00:49:00: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up
> > 00:49:00: BR0/0:1 PPP: Using dialer call direction
> > 00:49:00: BR0/0:1 PPP: Treating connection as a callout
> > 00:49:00: BR0/0:1 DDR: disconnecting call
> > 00:49:4294967295: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected
to
> > 212744
> > 4444 R_3
> > 00:49:00: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to down.
> > 00:49:00: BR0/0:1 DDR: disconnecting call
> > 00:49:01: BR0/0 DDR: Dialing cause ip (s=165.4.113.1, d=165.4.113.3)
> > 00:49:01: BR0/0 DDR: Attempting to dial 2127444444
> > 00:49:02: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up
> > 00:49:02: BR0/0:1 PPP: Using dialer call direction
> > 00:49:02: BR0/0:1 PPP: Treating connection as a callout
> > 00:49:02: BR0/0:1 DDR: disconnecting call
> > 00:49:12884901887: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected
to
> > 21274
> > 44444 R_3
> > 00:49:02: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to down.
> > 00:49:02: BR0/0:1 DDR: disconnecting call
> > 00:49:03: BR0/0 DDR: Dialing cause ip (s=165.4.113.1, d=165.4.113.3)
> > 00:49:03: BR0/0 DDR: Attempting to dial 2127444444
> > 00:49:04: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up
> > 00:49:04: BR0/0:1 PPP: Using dialer call direction
> > 00:49:04: BR0/0:1 PPP: Treating connection as a callout
> > 00:49:04: BR0/0:1 DDR: disconnecting call
> > 00:49:21474836479: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected
to
> > 21274
> > 44444 R_3
> > 00:49:04: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to down.
> > Success rate is 0 percent (0/5)
> > R_1#
> > 00:49:04: BR0/0:1 DDR: disconnecting call
> > R_1#
> >
> >
> > _______________________________________________________________________
> > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:13 GMT-3