From: Jonathan V Hays (jhays@jtan.com)
Date: Fri Jun 27 2003 - 13:37:00 GMT-3
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of Emad
> Sent: Friday, June 27, 2003 12:18 PM
> To: ccielab@groupstudy.com
> Subject: QoS: vofr command
>
>
> Folks,
> I read about the usage of the command " vofr cisco" in IP
> QoS book, but
> I don't know exactly the function of it and under the
> interface or not ,
> I can use it beside of course the IOS versions supporting it
>
> Note: I found it in page 200 of this book of Srinivas Vegesna
> thanx
Reading the Doc CD configuration guide is helpful -
<quote>
Router(config-fr-dlci)# vofr cisco
Configures the DLCI and the Cisco proprietary voice encapsulation for
switched calls to Cisco MC3810 multiservice concentrators. When this
command is entered, data CID 4 and call-control CID 5 are automatically
assigned.
</quote>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/
fvvfax_c/vvfvofr.htm
And so is the command reference entry for this command -
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/
fvvfax_r/vrf_t.htm#1072284
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:12 GMT-3