From: Daniel Cisco Group Study (danielcgs@imc.net.au)
Date: Fri Jun 27 2003 - 02:56:06 GMT-3
That's the one.....
Daniel
-----Original Message-----
From: Kevin Tang [mailto:Kevin.Tang@telecom.co.nz]
Sent: Friday, 27 June 2003 13:31
To: Daniel Cisco Group Study
Subject: RE: Route-map - Set Level question (OSPF)
Do you mean this?
R2(config-route-map)#set level ?
backbone Import into OSPF backbone area
level-1 Import into a level-1 area
level-1-2 Import into level-1 and level-2
level-2 Import into level-2 sub-domain
stub-area Import into OSPF NSSA area
<cr>
-----Original Message-----
From: Daniel Cisco Group Study [mailto:danielcgs@imc.net.au]
Sent: Friday, 27 June 2003 14:48
To: ccielab@groupstudy.com
Subject: Route-map - Set Level question (OSPF)
I've come across the command "set level". at the following URL
I can understand its use in ISIS, but how is it used in OSPF? I've played around with this, and could not make it do anything useful.....
The default is "set level backbone".
But I could not come up with a use for "set level stub-area".
Can anyone explain this command, and provide an example config regarding its use?
Thanks,
Daniel
**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.
This footnote also confirms that this email message has been swept by
MIMEsweeper for the presence of computer viruses.
www.mimesweeper.com
**********************************************************************
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:12 GMT-3