ip ospf demand-circuit under interface dialer 0 doesn't work

From: Peng Zheng (zpnist@yahoo.com)
Date: Thu Jun 26 2003 - 17:25:50 GMT-3

• Next message: John Matijevic: "Re: OSPF not inserting route into route table."
• Previous message: Cristian Henry H: "Re: Voice VLAN and data traffic with and without trunking"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I have two routers, r3 and r4. If I do not use dialer
interface on both them, ip ospf demand-circuit works
well. But if I user dialer profile on r3, After a
while, it bring up the link because ospf from init to
down.
How can I config ip ospf demand-circuit with dialer
profile?

Thanks.

__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com

• Next message: John Matijevic: "Re: OSPF not inserting route into route table."
• Previous message: Cristian Henry H: "Re: Voice VLAN and data traffic with and without trunking"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:11 GMT-3