From: Scott Morris (swm@emanon.com)
Date: Thu Jun 26 2003 - 12:06:03 GMT-3
There's a 'clock' command, but I'm not aware of a 'calendar' command.
From exec prompt:
Router# clock set hh:mm:ss 1 April 1999
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccie2be
Sent: Thursday, June 26, 2003 11:02 AM
To: Group Study
Subject: The hardware clock
Hi all,
Based on Cisco's documentation, most Cisco devices have a battery
powered hardware clock which can be set using the calendar command. I
have a bunch of cisco 2500's in my lab but none of them support the
calendar command.
Does this mean 2500's don't have a hardware clock or are there other
commands I need to use to set the hardware clock?
FYI: These same routers support the command clock set which I understand
to be the way to set the software clock.
Thanks, Jim
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:10 GMT-3