From: beda jain (bpjain@cisco.com)
Date: Thu Jun 26 2003 - 11:54:57 GMT-3
Hi,
I think you need to do it in R1 e1 interface not in loopback.
Thanks,
Beda
At 10:25 PM 6/26/2003 +0900, wrote:
> hi there & daniel
>
> your concern was solved at groupstudy mailing-list by someone,, I cann't
> remember who..
> the key command is "h323-gateway voip bind srcaddr <ip_address>" that
> is interface command
>
> for example
>
> lo0 172.16.2.1 R1 e1(10.1.1.1) -------------------- e2(10.1.1.2) R2 lo0
> 172.16.1.1
>
> the configure on R1 is as following
> !
> R1
> !
> interface loopback 0
> ip address 172.16.2.1 255.255.255.0
> h323-gateway voip bind srcaddr 172.16.2.1 -> interface command
> !
> dial-peer voice 11 pots
> destination-pattern 1111...
> port 1/0/0
> !
> dial-peer voice 22 voip
> destination-pattern 2222...
> session target ipv4:172.16.1.1
> ip preference 5
> !
>
>you can find the way to solve your concern...
>
>R2> show call active voice 8m7I=C
> onnectionId[0x65B8E25C 0x14F211CC 0x8024B9BB 0xB6B4DD0A]
>IncomingConnectionId[0x65B8E25C 0x14F211CC 0x8024B9BB 0xB6B4DD0A]
>RemoteIPAddress=172.16.2.1 --> this ip address is the loopback of R1
>RemoteUDPPort=17272
>RemoteSignallingIPAddress=137.12.22.2 --> this ip address is the loopback
>of R1
>RemoteSignallingPort=1720
>RemoteMediaIPAddress=137.12.22.2 --> this ip address is the loopback of R1
>RemoteMediaPort=17272
>RoundTripDelay=0 ms
>SelectedQoS=best-effort
>tx_DtmfRelay=inband-voice
>FastConnect=TRUE ..
>
>
>search the document on the CD-ROM or WEB for more detail of this command..
>
>you know this way is very effective for VOIPsession sustenance even if the
>link-fail occurs..
>but you must have redundancy-path
>
>
>_______________________________________________________________________
>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:10 GMT-3