From: MADMAN (dave@interprise.com)
Date: Wed Jun 25 2003 - 13:50:25 GMT-3
Can you get it to work by simply using PPP encap. leaving out all the
other extraneous stuff??
Dave
John Matijevic wrote:
> Hello Team,
> Hopefullly an easy quick question that I am missing something obvious:
> Here it goes I am configuring ppp encapsulation and chap authentication on a
> serial line to use with AAA. For some reason I can get the serial line status
> and protocol to up but cannot ping the remote side or local, I do have the
> username configured on both routers. IF I use HDLC and no AAA it works fine,
> and I can ping both sides. I have done this many times with the BRI interface
> and with ISDN. Has anyone done this before with serial? Any help greatly
> appreciated !!
> Sincerely,
> Matijevic
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367"Government can do something for the people only in proportion as it can do something to the people." -- Thomas Jefferson
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:09 GMT-3