From: Jonathan V Hays (jhays@jtan.com)
Date: Wed Jun 25 2003 - 13:16:10 GMT-3
Please post your configs.
Thanks.
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of John Matijevic
> Sent: Wednesday, June 25, 2003 11:30 AM
> To: ccielab@groupstudy.com
> Subject: ppp authentication on serial line
>
>
> Hello Team,
> Hopefullly an easy quick question that I am missing something obvious:
> Here it goes I am configuring ppp encapsulation and chap
> authentication on a
> serial line to use with AAA. For some reason I can get the
> serial line status
> and protocol to up but cannot ping the remote side or local,
> I do have the
> username configured on both routers. IF I use HDLC and no AAA
> it works fine,
> and I can ping both sides. I have done this many times with
> the BRI interface
> and with ISDN. Has anyone done this before with serial? Any
> help greatly
> appreciated !!
> Sincerely,
> Matijevic
>
>
> ______________________________________________________________
> _________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:09 GMT-3