From: Charles Church (cchurch@wamnet.com)
Date: Wed Jun 25 2003 - 12:46:26 GMT-3
Are any of the CPs established? On the interface, you should see IPCP and
CDPCP open. CDP isn't really needed, but it'll tell you if packets are
crossing successfully.
Chuck Church
CCIE #8776, MCNE, MCSE
Wam!Net Government Services
13665 Dulles Technology Dr. Ste 250
Herndon, VA 20171
Office: 703-480-2569
Cell: 703-819-3495
cchurch@wamnet.com
PGP key: http://pgp.mit.edu:11371/pks/lookup?search=chuck+church&op=index
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
John Matijevic
Sent: Wednesday, June 25, 2003 11:30 AM
To: ccielab@groupstudy.com
Subject: ppp authentication on serial line
Hello Team,
Hopefullly an easy quick question that I am missing something obvious:
Here it goes I am configuring ppp encapsulation and chap authentication on a
serial line to use with AAA. For some reason I can get the serial line
status
and protocol to up but cannot ping the remote side or local, I do have the
username configured on both routers. IF I use HDLC and no AAA it works fine,
and I can ping both sides. I have done this many times with the BRI
interface
and with ISDN. Has anyone done this before with serial? Any help greatly
appreciated !!
Sincerely,
Matijevic
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:09 GMT-3