From: pierreg (pierreg@mail.planetkc.com)
Date: Wed Jun 25 2003 - 11:05:16 GMT-3
A gentleman a while ago asked a question in the archive regarding running LLC2 over multipoint interfaces. His question was answered but not referenced. I thought I would contribute to the archive... So here it is:
"It (LLC2) is currently supported only over Frame Relay and assumes a point-to-point configuration over Frame Relay (that is, the peering router at the central site is also the WAN router). DLSw Lite does not support all media types. See Appendix B, "DLSw+ Support Matrix," for details. DLSw Lite is process switched and processes approximately the same traffic volume as TCP encapsulation. "
http://www.cisco.com/warp/public/cc/pd/ibsw/ibdlsw/tech/dls3_rg.htm
Pierre-Alex
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:09 GMT-3