From: Hunt Lee (huntl@webcentral.com.au)
Date: Mon Jun 23 2003 - 20:28:19 GMT-3
Hello Group,
I want to beef up my 4500M+ to 16MB Flash so I can run 12.2 code on it...
Under the "show version" (as below), I see 2 different flash:
4096K bytes of processor board System flash (Read/Write)
4096K bytes of processor board Boot flash (Read/Write)
How does the 4500M+ works? Does it mean that I will need to have both the
System Flash & Boot Flash up to 16MB? If so, does anyone where I can find
some?
And if I need to find them, are they just called?
4500M System Flash
AND
4500M Boot Flash
Thanks so much for the help in advance,
Regards,
Hunt
Router#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 4500 Software (C4500-I-M), Version 11.1(5), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1996 by cisco Systems, Inc.
Compiled Mon 05-Aug-96 13:40 by mkamson
Image text-base: 0x600088A0, data-base: 0x6042A000
ROM: System Bootstrap, Version 5.3(16) [richardd 16], RELEASE SOFTWARE (fc1)
ROM: 4500 Software (C4500-BOOT-M), Version 11.1(7), RELEASE SOFTWARE (fc2)
Router uptime is 1 minute
System restarted by reload
System image file is "flash:c4500-i-mz.111-5", booted via flash
cisco 4500 (R4K) processor (revision D) with 16384K/4096K bytes of memory.
Processor board ID 05795949
R4700 processor, Implementation 33, Revision 1.0
G.703/E1 software, Version 1.0.
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
128K bytes of non-volatile configuration memory.
4096K bytes of processor board System flash (Read/Write)
4096K bytes of processor board Boot flash (Read/Write)
Configuration register is 0x2102
Router#
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:08 GMT-3