From: Nawaz, Ajaz (Ajaz.Nawaz@bskyb.com)
Date: Mon Jun 23 2003 - 11:56:09 GMT-3
with the version of catOS you are using - only phsical observation will
reveal s/n on PSU's (and chassis) for both 6509 and 7513.
ajaz
-----Original Message-----
From: wing_lam@jossynergy.com [mailto:wing_lam@jossynergy.com]
Sent: 23 June 2003 15:17
To: Roberto Giana
Cc: ccielab@groupstudy.com
Subject: RE: power supply
Thx Roberto,
I am sorry that my Cat OS is in 5.5 and the serial number cannot be shown,
it just as following, any more idea?
Thx,
BBD (Big Black Dog)
s65cor01ephk> (enable) sh ver
WS-C6509 Software, Version NmpSW: 5.5(1)
Copyright (c) 1995-2000 by Cisco Systems
NMP S/W compiled on Jun 8 2000, 21:09:45
System Bootstrap Version: 5.3(1)
Hardware Version: 2.0 Model: WS-C6509 Serial #: SCA044200J1
Mod Port Model Serial # Versions
--- ---- ------------------- -----------
--------------------------------------
1 2 WS-X6K-SUP1A-2GE SAD04350MN9 Hw : 3.2
Fw : 5.3(1)
Fw1: 5.4(2)
Sw : 5.5(1)
Sw1: 5.5(1)
L3 Switching Engine SAD04410EJX Hw : 1.1
DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1 65408K 38921K 26487K 16384K 6925K 9459K 512K 283K 229K
Uptime is 381 days, 8 hours, 58 minutes
s65cor01ephk> (enable)
Roberto Giana
<Roberto.Giana@ec To:
"'wing_lam@jossynergy.com'" <wing_lam@jossynergy.com>,
ccielab@groupstudy.com
onis.com> cc:
Sent by: Subject: RE: power supply
nobody@groupstudy
.com
06/23/2003 08:42
PM
Please respond to
Roberto Giana
Hi
On the Cat6509 just do a "show version" on the sup-engine:
Console> (enable) show ver
WS-C6509-NEB Software, Version NmpSW: 7.6(1)
Copyright (c) 1995-2003 by Cisco Systems
NMP S/W compiled on Apr 16 2003, 18:15:28
System Bootstrap Version: 5.3(2)
System Boot Image File is 'bootflash:cat6000-supk8.7-6-1.bin'
System Configuration register is 0x102
Hardware Version: 3.0 Model: WS-C6509-NEB Serial #: TBM06197614
PS1 Module: WS-CAC-1300W Serial #: ACP04290006
PS2 Module: WS-CAC-1300W Serial #: SNI06160134
.
.
.
Best regards
Roberto
-----Original Message-----
From: wing_lam@jossynergy.com [mailto:wing_lam@jossynergy.com]
Sent: Montag, 23. Juni 2003 14:29
To: ccielab@groupstudy.com
Subject: power supply
Hi group,
Anybody knows how can I determine the power supply's serial number by
command for the following platforms?
i) Catalyst 6509
ii) Cisco 7513
Thx,
BBD (Big Black Dog)
DISCLAIMER:- This email is confidential and intended only for the use of
the individual or entity named above and may contain information that is
privileged. If you are not the intended recipient, you are notified that
any dissemination, distribution or copying of this email is strictly
prohibited. If you have received this email in error, please notify us
immediately by return email or telephone and destroy the original message.
Thank you.
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:07 GMT-3