From: Roberto Giana (Roberto.Giana@econis.com)
Date: Mon Jun 23 2003 - 09:42:41 GMT-3
Hi
On the Cat6509 just do a "show version" on the sup-engine:
Console> (enable) show ver
WS-C6509-NEB Software, Version NmpSW: 7.6(1)
Copyright (c) 1995-2003 by Cisco Systems
NMP S/W compiled on Apr 16 2003, 18:15:28
System Bootstrap Version: 5.3(2)
System Boot Image File is 'bootflash:cat6000-supk8.7-6-1.bin'
System Configuration register is 0x102
Hardware Version: 3.0 Model: WS-C6509-NEB Serial #: TBM06197614
PS1 Module: WS-CAC-1300W Serial #: ACP04290006
PS2 Module: WS-CAC-1300W Serial #: SNI06160134
.
.
.
Best regards
Roberto
-----Original Message-----
From: wing_lam@jossynergy.com [mailto:wing_lam@jossynergy.com]
Sent: Montag, 23. Juni 2003 14:29
To: ccielab@groupstudy.com
Subject: power supply
Hi group,
Anybody knows how can I determine the power supply's serial number by
command for the following platforms?
i) Catalyst 6509
ii) Cisco 7513
Thx,
BBD (Big Black Dog)
DISCLAIMER:- This email is confidential and intended only for the use of
the individual or entity named above and may contain information that is
privileged. If you are not the intended recipient, you are notified that
any dissemination, distribution or copying of this email is strictly
prohibited. If you have received this email in error, please notify us
immediately by return email or telephone and destroy the original message.
Thank you.
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:06 GMT-3