From: John Matijevic (matijevi@bellsouth.net)
Date: Sun Jun 22 2003 - 13:14:30 GMT-3
Emad,
It looks like you configure it on both main and sub with frame-relay, from
reading this doc, it looks like you can set different values for the main
and sub or use the same. Here is the doc for futher reference.
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800b75c7.html#95271
Sincerely,
Matijevic
----- Original Message -----
From: "Emad " <emad@zakq8.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, June 22, 2003 11:54 AM
Subject: QoS: RSVP
> Folks,
> While I'm reading DOC CD about RSVP , I get confused with the command
> "IP" rsvp bandwidth," with the frame-relay , is it required to be
> configured on the main interface and the subinterface also or just on
> the subinterfaces only?
> Please advise
> thanx
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:05 GMT-3