From: Jonathan V Hays (jhays@jtan.com)
Date: Sat Jun 21 2003 - 18:17:04 GMT-3
I did disable fast-switching on the serial interfaces. But the fast
switching issue does not explain why debug did not see ethernet segment
broadcasts that my PC sniffer did, when plugged into the same hub (not a
switch).
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of Volkov, Dmitry (IDS Canada)
> Sent: Saturday, June 21, 2003 3:14 PM
> To: 'Jonathan V Hays'; ccielab@groupstudy.com
> Cc: wing_lam@jossynergy.com
> Subject: RE: helper address
>
>
> Did You disable fast switching ?
> http://www.cisco.com/en/US/tech/tk801/tk379/technologies_tech_
> note09186a0080
> 17874c.shtml#debugippacket
>
> > -----Original Message-----
> > From: Jonathan V Hays [mailto:jhays@jtan.com]
> > Sent: Saturday, June 21, 2003 2:07 PM
> > To: ccielab@groupstudy.com
> > Cc: wing_lam@jossynergy.com
> > Subject: RE: helper address
> >
> >
> > Hi,
> >
> > You are right that "debug ip packet detail" seems a bit
> flaky in this
> > instance.
> >
> > I spent some time experimenting with "ip helper-address" myself,
> > generating DHCP Discover messages to be forwarded by the router to a
> > remote server. Not only did I not see the packets on the
> > remote segment,
> > "debug ip packet detail" does not always see the DHCP Discover
> > broadcasts from the client on the LOCAL segment, even when my
> > PC sniffer
> > sees them. Hmmm. Strange ....
> >
> > Jonathan
> >
> > > -----Original Message-----
> > > From: wing_lam@jossynergy.com [mailto:wing_lam@jossynergy.com]
> > > Sent: Monday, June 23, 2003 11:15 AM
> > > To: Jonathan V Hays
> > > Cc: ccielab@groupstudy.com
> > > Subject: RE: helper address
> > >
> > >
> > >
> > > Hi Jonathan,
> > >
> > > I am generating UDP broadcast by port 2000 traffic in
> > > 192.168.1.0/24 subnet
> > > and I have used helper address and forward-protocol in the router:
> > >
> > > Host broadcast --> 192.168.1.1 router -- ATM p-to-p--
> > > 192.168.2.4 router
> > >
> > > My comand is ip helper-address 192.168.2.4 & ip
> > > forward-protocol udp 2000
> > >
> > > But when I "debug ip packet detail" in the 192.168.2.4
> > > router, I haven't
> > > see any packet comes.
> > >
> > > Should I able to see these helpered packets in 192.168.2.4
> > > router? or it's
> > > normal that I cannot see them?
> > >
> > > The following is my interface config
> > >
> > > interface FastEthernet0/0
> > > ip address 192.168.1.1 255.255.255.0
> > > ip helper-address 192.168.2.4
> > > ip directed-broadcast
> > > ip router isis DOG
> > > ip pim dr-priority 100
> > >
> > > Thx,
> > > BBD (Big Black Dog)
> > >
> > >
> > >
> > >
> > >
> > >
> > > "Jonathan V Hays"
> > >
> > >
> > > <jhays@jtan.com> To:
> > > <ccielab@groupstudy.com>
> > >
> > > cc:
> > > <wing_lam@jossynergy.com>
> > >
> > > 06/21/2003 11:05 Subject: RE:
> > > helper address
> > >
> > > PM
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > > -----Original Message-----
> > > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> > > > Behalf Of wing_lam@jossynergy.com
> > > > Sent: Monday, June 23, 2003 5:23 AM
> > > > To: ccielab@groupstudy.com
> > > > Subject: helper address
> > > >
> > > >
> > > > Hi, Group;
> > > >
> > > > I would like to test the "ip helper" address function. I
> > > > generate a subnet
> > > > broadcast in a interface and using helper address to redircet
> > > > this subnet
> > > > broadcast to another host, but no matter I do what debugging,
> > > > I cannot see
> > > > packet go to the host; anybody please suggest a testing
> > > > method on whether
> > > > the helper address config is success.
> > >
> > >
> > > Please be more specific. Given the sketchy information you
> > > have provided
> > > we would have to do a LOT of guessing to figure out what you
> > > are doing.
> > >
> > > 1. Post your config.
> > >
> > > 2. Describe the topology.
> > >
> > > 3. Describe exactly what you are doing to test. How are you
> > generating
> > > the broadcast? On what machine? Another router? What kind
> > of broadcast
> > > are you generating? What debug command are you using and
> > where are you
> > > using it?
> > >
> > > Note that the "ip helper-address" forwards specific
> > broadcasts for the
> > > eight UDP destination ports below:
> > >
> > > 37 time server
> > > 49 TACACS
> > > 53 DNS
> > > 67 BOOTP/DHCP Server
> > > 68 BOOTP/DHCP Client
> > > 69 TFTP
> > > 137 NETBIOS Name Service
> > > 138 NETBIOS Datagram Service
> > >
> > > So if you are testing the helper-address command you will have to
> > > generate one of those types of broadcasts.
> > >
> > http://www.cisco.com/univercd/cc/td/doc/product/software/ios12
> > 2/122cgcr/
> > fipras_r/1rfipadr.htm#1018608
> >
> > HTH
> >
> >
> > ______________________________________________________________
> > _________
> > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> ______________________________________________________________
> _________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:04 GMT-3