From: MMoniz (ccie2002@tampabay.rr.com)
Date: Sat Jun 21 2003 - 17:38:02 GMT-3
Well I was going to ask a question on this topic but first.....
if I was to answer yours I would be in trouble....
My question.
In setting the clp bit for QOS is it advisable to set ip prec 3 and below or
just 0?
If I am thinking right the call control has a prec of 3..so if congestion
was encountered
the call setup may be discarded but not the actual call?
Any thoughts?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Emad
Sent: Saturday, June 21, 2003 3:37 PM
To: CCIE LAB
Subject: QoS:what about ATM
Folks,
I'm about to finish reading most of the DOC CD about QoS , but I'm
wondering about the QoS on ATM part , that is required for the LAB , I
heard before while I was taking the training course (CCIE lab) , that
the ATm part is only a connection to one of the routers and they didn't
talk about QoS at all, please can anyone advise for that issue , is
there QoS part for applying on the ATM or what? My head is really
spinning
thanx
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:04 GMT-3