From: Nguyen Hoang Long (ng-hlong@hn.vnn.vn)
Date: Wed Jun 18 2003 - 23:16:01 GMT-3
Yes, I think so, that's why they list :
Configuring the Switch-to-RADIUS-Server Communication (required)
link:
http://127.0.0.1:8080/cc/td/doc/product/lan/c3550/12111ea1/3550scg/sw8021x.htm#xtocid6
Long
----- Original Message -----
From: "Snow, Tim" <timothy.snow@eds.com>
To: "'Emad '" <emad@zakq8.com>
Cc: <ccielab@groupstudy.com>
Sent: Thursday, June 19, 2003 4:28 AM
Subject: RE: CAT3550:dot1x command
> it doesn't look like local authentication works which is why they state
"use
> atleast one of the following keywords"
>
> Tim
>
> -----Original Message-----
> From: Emad [mailto:emad@zakq8.com]
> Sent: Wednesday, June 18, 2003 4:54 PM
> To: 'Snow, Tim'
> Cc: ccielab@groupstudy.com
> Subject: RE: CAT3550:dot1x command
> Importance: High
>
>
> It was enabled , is that what you mean?
>
> -----Original Message-----
> From: Snow, Tim [mailto:timothy.snow@eds.com]
> Sent: Wednesday, June 18, 2003 11:48 PM
> To: 'Emad '
> Cc: 'ccielab@groupstudy.com'
> Subject: RE: CAT3550:dot1x command
>
> Looking at the 3550 doco, it says
>
> "aaa authentication {default} method1 method2
>
> Enter atleast on of these keywords
>
> group radius - Use the list of all Radius servers for authentication
> none - use no authentication.
>
> I'll keep looking but I don't see an example for local authentication...
>
> Do you do a "show dot1x" what state is the port in?
>
> Tim
>
> -----Original Message-----
> From: Emad [mailto:emad@zakq8.com]
> Sent: Wednesday, June 18, 2003 11:56 AM
> To: ccielab@groupstudy.com
> Subject: CAT3550:dot1x command
>
>
> Folks,
> I was testing he command dot1x on my switch but I failed to test it as
> my laptop gave me " windows was unable to find a certificate to log you
> on to the network " after finishing this configurations:
>
> aaa new-model
> aaa authentication dot1x default local
>
> interface FastEthernet0/18
> switchport access vlan 3
> switchport mode access
> no ip address
> dot1x port-control auto
>
> I think the configuration is right and straight forward but how can I
> send the username and password from the connected device?
>
> thanx
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:00 GMT-3