From: Emad (emad@zakq8.com)
Date: Wed Jun 18 2003 - 17:52:25 GMT-3
WaW , I have EMI version 12.1(12c)EA1 , what is the required one in the
lab nowadays by the way?
-----Original Message-----
From: MADMAN [mailto:dave@interprise.com]
Sent: Wednesday, June 18, 2003 11:47 PM
To: Jonathan V Hays
Cc: 'Emad '; dmadlan@qwest.com; ccielab@groupstudy.com
Subject: Re: CAT3550: Prompt command
The example I sent was an EMI version 12.3.1 and the prompt command
was there!!
Dave
Jonathan V Hays wrote:
> Emad,
>
> Yes - that is what the documentation says in the link you provided and
> maybe the "prompt" command worked for an early release of software.
>
> That command does not work in recent releases of Cat 3550 software. I
> think the documentation needs updating.
>
> s2_3550#sh ver
> Cisco Internetwork Operating System Software
> IOS (tm) C3550 Software (C3550-I5Q3L2-M), Version 12.1(13)EA1a,
RELEASE
> SOFTWARE (fc1)
>
> [text omitted]
>
> s2_3550#conf t
> Enter configuration commands, one per line. End with CNTL/Z.
> s2_3550(config)#prompt switch
> ^
> % Invalid input detected at '^' marker.
>
> s2_3550(config)#p?
> policy-map port-channel priority-list privilege process-max-time
>
> s2_3550(config)#
>
> HTH,
>
> Jonathan
>
>
>>-----Original Message-----
>>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
>>Behalf Of Emad
>>Sent: Wednesday, June 18, 2003 10:33 AM
>>To: dmadlan@qwest.com
>>Cc: ccielab@groupstudy.com
>>Subject: RE: CAT3550: Prompt command
>>
>>
>>No it is stated in the DOC CD as per the below link :
>>http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/1211
>>3ea1/3550s
>>cg/swadmin.htm#1020804
>>
>>It stated that you can overwrite the hostname command with prompt
>>command from the global configuration mode
>>Please check it and tell me ur opinion
>>
>>
>>-----Original Message-----
>>From: MADMAN [mailto:dave@interprise.com]
>>Sent: Wednesday, June 18, 2003 5:14 PM
>>To: Emad
>>Cc: ccielab@groupstudy.com
>>Subject: Re: CAT3550: Prompt command
>>
>>
>> There is no prompt command, it's IOS:
>>
>>C3745#conf t
>>Enter configuration commands, one per line. End with CNTL/Z.
>>C3745(config)#hostname MADMAN
>>MADMAN(config)#
>>
>> Dave
>>
>>Emad wrote:
>>
>>>Dear all,
>>>What about the prompt command , I didn't find it too on my switch
>>>What is ur opinion about that?
>>>thanx
>>>
>>>
>>>
>>
>>______________________________________________________________
>>_________
>>
>>>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>>>
>>>Subscription information may be found at:
>>>http://www.groupstudy.com/list/CCIELab.html
>>>
>>
>>
>>--
>>David Madland
>>CCIE# 2016
>>Sr. Network Engineer
>>Qwest Communications
>>612-664-3367
>>
>>"Government can do something for the people only in proportion as it
>>can do something to the people." -- Thomas Jefferson
>>
>>
>>______________________________________________________________
>>_________
>>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>>
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>
>
>
>
>
-- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367"Government can do something for the people only in proportion as it can do something to the people." -- Thomas Jefferson
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:00 GMT-3