From: Snow, Tim (timothy.snow@eds.com)
Date: Wed Jun 18 2003 - 17:47:58 GMT-3
Looking at the 3550 doco, it says
"aaa authentication {default} method1 method2
Enter atleast on of these keywords
group radius - Use the list of all Radius servers for authentication
none - use no authentication.
I'll keep looking but I don't see an example for local authentication...
Do you do a "show dot1x" what state is the port in?
Tim
-----Original Message-----
From: Emad [mailto:emad@zakq8.com]
Sent: Wednesday, June 18, 2003 11:56 AM
To: ccielab@groupstudy.com
Subject: CAT3550:dot1x command
Folks,
I was testing he command dot1x on my switch but I failed to test it as
my laptop gave me " windows was unable to find a certificate to log you
on to the network " after finishing this configurations:
aaa new-model
aaa authentication dot1x default local
interface FastEthernet0/18
switchport access vlan 3
switchport mode access
no ip address
dot1x port-control auto
I think the configuration is right and straight forward but how can I
send the username and password from the connected device?
thanx
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:00 GMT-3