From: ccie2002@tampabay.rr.com
Date: Wed Jun 18 2003 - 13:18:34 GMT-3
Yes. But currently one of my 3550 is being used in prod. So that is why the
Standby address shows unknown. We also run this scenario in our production net
with Cat 4000 Sup III L3
interface Vlan20
ip address 10.115.12.1 255.255.255.0 secondary
ip address 10.115.6.1 255.255.255.128
no ip redirects
standby 1 ip 10.115.6.2
standby 1 timers 3 5
standby 1 priority 100
standby 1 preempt
standby 2 ip 10.115.12.2
standby 2 timers 3 5
standby 2 priority 100
standby 2 preempt
VDL-CAT#sho stan brie
P indicates configured to preempt.
|
Interface Grp Prio P State Active addr Standby addr Group addr
Vl20 1 100 P Active local unknown 10.115.6.2
Vl20 2 100 P Active local unknown 10.115.12.2
VDL-CAT#
Has anyone ever configured HSRP on secondary IP addresses configured on VLAN
interfaces
between 2 3550s? If yes, was it successful?
>
> Thanks,
>
> Robert
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:00 GMT-3