From: SHARMA,MOHIT (HP-Germany,ex1) (mohit.sharma@hp.com)
Date: Tue Jun 17 2003 - 18:01:13 GMT-3
HI All,
Going thru the PArkhurst BGP book, found an example for the acl while using
BGP distribute list-
According to the book to match the aggregate 172.16.0.0 255.255.252.0, you
use-
access-list 100 permit 172.16.0.0 0.0.3.255 255.255.252.0 0.0.0.0
IS this really right????????
Can I also use -
access-list 100 permit 172.16.0.0 0.0.0.255 255.255.252.0 0.0.0.0
Why do I need a 0.0.3.255 and not a complete 0.0.0.0 to match the network??
Also will these work as well-
access-list 100 permit host 172.16.0.0 host 255.255.252.0
or
prefix-list seq 5 permit 172.16.0.0/22.
PLease do help.
Thanks as always.
Smiles,
Mohit.____________________________________________________________________
****** _/ ****** | Mohit Sharma
***** _/ ***** | Network Operations Engineer
**** _/_/_/ _/_/_/ **** | HP Operations
**** _/ _/ _/ _/ **** |
**** _/ _/ _/_/_/ **** |
***** _/ ***** |
****** ******* | email: mohit_sharma@hp.com
|
i n v e n t |
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:59 GMT-3