From: Brian Dennis (brian@labforge.com)
Date: Tue Jun 17 2003 - 16:30:36 GMT-3
As a side note "low speed" physical interfaces default to 128k.
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Scott Morris
Sent: Tuesday, June 17, 2003 4:59 AM
To: ZaferP@koc.net; ccielab@groupstudy.com
Cc: GokhanS@koc.net
Subject: RE: CBWFQ-FRTS-RSVP
The default reservable bandwidth is 75% of the presumed link bandwidth,
whatever that may be. If you do a show interface, you can figure that
part out. Physical serial interfaces, the default assumed bandwidth is
1.544M. On sub-interfaces, it actually varies per IOS train on what the
default is, so just do a 'show interface' to see that.
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ZaferP@koc.net
Sent: Tuesday, June 17, 2003 4:07 AM
To: ccielab@groupstudy.com
Cc: GokhanS@koc.net
Subject: CBWFQ-FRTS-RSVP
Simple and straight question:
When using FRTS with CBWFQ or RSVP, is the reservable bandwith is
a) % 75 of CIR
b) %75 of MINCIR
c) CIR
d) MINCIR
e) None of the above
Plese respond with an offical link if possible not just guessing.
Regards
Zafer
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:59 GMT-3