From: Carter, Lee (Lee.Carter@CommerceBank.com)
Date: Tue Jun 17 2003 - 11:13:52 GMT-3
I agree,
When you do a session 15 you are really just doing a telnet to 127.0.0.x
were x is the module number plus 10. If you router is in RMON you have no IP
running on the MSFC. Doing a switch console will give you the same vt100
access to the MSFC to wach it boot and other stuff like RMON recovery.
-----Original Message-----
From: MADMAN [mailto:dave@interprise.com]
Sent: Tuesday, June 17, 2003 9:01 AM
To: Ted McDermott
Cc: ccielab@groupstudy.com
Subject: Re: Cat 6509 Cat OS Session Message when trying to access MSFC
from Cat OS
Yes I have, your MSFC is probably in ROMMON! Try doing a switch con
15, you must be on the console to do this.
Dave
Ted McDermott wrote:
> Has anyone ever seen this message,
>
>
> "Switch1> (enable) sess 15
> Trying Router-15...
> session: Unable to tunnel to Router-15 (57)"
>
> when trying to access the MSFC from the Catalyst 6509
> switch?
>
>
> The MSFC is not active in terms of routing
> functionality but the card is active.
>
> __________________________________
> Do you Yahoo!?
> SBC Yahoo! DSL - Now only $29.95 per month!
> http://sbc.yahoo.com
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367"Government can do something for the people only in proportion as it can do something to the people." -- Thomas Jefferson
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:59 GMT-3