From: wing_lam@jossynergy.com
Date: Mon Jun 16 2003 - 10:58:17 GMT-3
Thanks Clay, I can connected now.
BBD (Big Black Dog)
Clay Maney
<clay@pronettech. To: wing_lam@jossynergy.com
com> cc:
Subject: Re: VPN 3005
06/16/2003 09:24
PM
There's two places in the 3005 you need to look at...
rules, and filters.
Rules are applied to filters, and filters are applied to the groups.
There is no need for the ACS server in this scenario, although you *can*
add it if you want.
HTH,
Clay
On Sun, Jun 15, 2003 at 10:26:30PM +0800, wing_lam@jossynergy.com wrote:
> Thank you again, do you mean I no need to co-operate with the ACS to
> achieve this? Just configure filters in VPN 3005?
>
> BBD (Big Black Dog)
>
>
>
>
>
> "MMoniz"
> <ccie2002@tampaba To:
<wing_lam@jossynergy.com>, <ccielab@groupstudy.com>
> y.rr.com> cc:
> Subject: RE: VPN 3005
> 06/15/2003 10:12
> PM
>
>
>
>
>
>
> Use filters for the group....create a filter and assign rules to it. Many
> rules are pre-configured but you can create
> your own as well. Make sure you test them though.
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> wing_lam@jossynergy.com
> Sent: Sunday, June 15, 2003 3:43 AM
> To: ccielab@groupstudy.com
> Subject: VPN 3005
>
>
> Hi Group,
>
> I have installed a VPN 3005 and would like to restrict only certain
> services the a client can access. How can I perform this? I am new in VPN
> 3005 and only know how to restrict by IP address by using Split-tunnel,
but
> I have no idea on restrict by service like tcp port number ort protocol,
am
> I need to combine with ACS to achieve this or I can do this just by the
VPN
> 3005?
>
> Thx a lot,
> BBD (Big Black Dog)
> DISCLAIMER:- This email is confidential and intended only for the use of
> the individual or entity named above and may contain information that is
> privileged. If you are not the intended recipient, you are notified that
> any dissemination, distribution or copying of this email is strictly
> prohibited. If you have received this email in error, please notify us
> immediately by return email or telephone and destroy the original
message.
> Thank you.
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:59 GMT-3