From: Sam Munzani (sam@munzani.com)
Date: Mon Jun 16 2003 - 10:53:34 GMT-3
Yes. They can co-exist. I am successfully using it. You might have to define
your split-tunnel policy. Please post your configs.
Thanks
Sam Munzani
CCIE #6479(R&S, Security)
> Hi Group,
>
> I have a PIX 501 with VPN installed, I found that it works find when my
> client behind broadband sharing device, but it's strange that it cannot
> work for I connect to dialup only with real IP (it can be connected, but I
> cannot reach the inside network)
>
> What's probably the problem is? Am I need to disable ISAKMP NAT-Traversal?
>
> How can make IPSec over UDP and IPSec client co-exist?
>
> Thx,
> BBD (Big Black Dog)
> DISCLAIMER:- This email is confidential and intended only for the use of
> the individual or entity named above and may contain information that is
> privileged. If you are not the intended recipient, you are notified that
> any dissemination, distribution or copying of this email is strictly
> prohibited. If you have received this email in error, please notify us
> immediately by return email or telephone and destroy the original message.
> Thank you.
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:59 GMT-3