From: Matthew Poole (matthew.poole@blueyonder.co.uk)
Date: Sun Jun 15 2003 - 04:36:12 GMT-3
Hi,
Should there be a directed broadcast statement on the outgoing interface of
the last hop router. In the example they don't have one, though if I recall
correctly when I last played with this it wouldn't work without it.
Any thoughts? I am planning on playing with this again today, I'll post my
results.
Mat.
----- Original Message -----
From: "Brian Dennis" <brian@labforge.com>
To: "'SHARMA,MOHIT (HP-Germany,ex1)'" <mohit.sharma@hp.com>;
<ccielab@groupstudy.com>
Sent: Sunday, June 15, 2003 7:30 PM
Subject: RE: IP multicast helper
> Here is the example from the DocCD.
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/
> ip_c/ipcprt3/1cdmulti.htm#1002616
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/
> ip_c/ipcprt3/1cdmulti.htm#1003511
>
> Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> SHARMA,MOHIT (HP-Germany,ex1)
> Sent: Sunday, June 15, 2003 9:33 AM
> To: ccielab@groupstudy.com
> Subject: IP multicast helper
>
> HI All,
>
> Could somebody please shed some light on this command-
> ip multicast helper-map cpommand, it pops up quite a lot, and cisco only
> has
> the command syntax which in itself is an enigma.
> An example would be great.
>
> Thanks as always.
>
> Smiles,
> Mohit.
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:59 GMT-3