From: Jonathan V Hays (jhays@jtan.com)
Date: Sun Jun 15 2003 - 23:34:56 GMT-3
Please make an ASCII diagram and post relevant configs. You don't even
state whether R5 is in the RIP domain or the OSPF domain, but I will
guess that since you say "from R5 except the RIP routes" that R5 is in
the OSPF domain.
If you are saying that R5 cannot successfully ping a route that is in
R5's routing table, then there's a chance that the remote router you are
pinging does not have a route back to R5. Or you have an access list
blocking it. Or you have a discontiguous network. Or ....
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of John Matijevic
> Sent: Sunday, June 15, 2003 8:34 PM
> To: ccielab@groupstudy.com
> Subject: totally stubby area
>
>
> Hello Team,
> I seem to have the following problem.
> I have ospf and I have rip redistributed to the ospf domain,
> I have configured
> a totally stubby area in one of my areas, and I can ping all
> of the network
> from R5 except the rip routes. I do have a default route that
> ospf injected as
> a type 3 summary lsa. I can reach the routes from R3 which is
> part of the
> totally stubby area, but I cannot reach from R5. Any ideas?
> Sincerely,
> Matijevic
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:58 GMT-3