From: Alec Pun (clapun@graduate.hku.hk)
Date: Sun Jun 15 2003 - 14:01:59 GMT-3
thanks a lot!
----- Original Message -----
From: "Brian Dennis" <brian@labforge.com>
To: "'Alec Pun'" <clapun@graduate.hku.hk>; <ccielab@groupstudy.com>
Sent: Sunday, June 15, 2003 10:39 PM
Subject: RE: FRTS on FR VC
> If you want to apply a map-class to a particular DLCI apply it under the
> frame-relay interface-dlci <dlci> command. See below:
>
> interface Serial0/0
> ip address 144.6.243.5 255.255.255.0
> encapsulation frame-relay
> no arp frame-relay
> frame-relay traffic-shaping
> frame-relay map ip 144.6.243.2 502 broadcast
> frame-relay map ip 144.6.243.3 503 broadcast
> frame-relay interface-dlci 502
> class TASK4.7
> no frame-relay inverse-arp
>
> Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Alec Pun
> Sent: Sunday, June 15, 2003 2:17 AM
> To: ccielab@groupstudy.com
> Subject: FRTS on FR VC
>
> Hi group,
>
> Just have a query on how to configure FRTS map-class for a specific PVC.
> Thanks.
>
> regards,
> alec
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:58 GMT-3